• Overview
• Applications
• Installing Apps
  • Official Store
  • Pre-installed on some firmware
  • Building with VSCode (Visual Studio Code)
  • Building with FBT
  • Building with UFBT
• Running the application
• Support

The FlipBoard is a versatile device for the Flipper Zero that can enable all kinds of features. It has 4 buttons that connect to the Flipper Zero via separate GPIO pins, so you can react to any combinations of button up/down events. Each button has a 24-bit color LED that is programmable using the WS2812b protocol. There is also a small single-color LED on the board you can use, for example, to signal a status change.

The FlipBoard applications are written in C and compiled into FAP (Flipper Application Packages). The GPIO and LED drivers can also be used in JavaScript applications that run on the Flipper Zero!

You can order your FlipBoard from @MakeItHackin using tindie or Etsy. Be sure to also join our Discord server.

Currently there are four applications written for the FlipBoard that demonstrate many of the key features:

• FlipKeyboard - A MacroPad that types using USB or BLE. Also a music keyboard.
• FlipBlinky - Turn the FlipBoard into blinky badge.
• FlipSignal - Send IR and Sub-GHz signals.
• Simon memory game
  • Tutorial step-by-step instructions to make your own game!
  • Completed game version of the game that is ready to play.

Here are some options for installation:

• Official Store
• Pre-installed on some firmware (like RogueMaster)
• Visual Studio Code
• Build FAP with FBT tool
• Build FAP with uFBT tool

The FlipBoard applications are now available in the Official Flipper Zero store. Connect your Flipper Zero to the computer, and browse the store web site using a Chrome or Edge browser. You should see an Install button to install the FlipBoard apps. You can also use the Official Mobile App to install the applications (choose Hub, then Apps, then GPIO category).

Currently the RogueMaster firmware has the FlipBoard applications pre-installed. This is a great option if you want to try out the applications without building them yourself.

This is the recommended configuration if you are going to be editing the existing applications or writing your own. You will get code completion and be able to step into the firmware code, finding out how a specific function works.

Prerequisites:

Most of the prerequisites links have a default "Download" button on the landing page (look for a button that says Download or has a download icon). For each of the installers, after you accept the license agreement, you can just click "Next" through the rest of the install process.

• Install Python
• Install GIT tools
• Install VSCode

Configure VSCode:

• Step 1: Make sure you have installed the above prerequisites.
• Step 2: Create a folder called repos in your home directory. You can use any folder you want, but this tutorial assumes you are using /repos folder. If you are using Windows, you can use C:\repos or C:\Users\yourname\repos or any other folder you want.
• Step 3: Open VSCode.
• Step 4: Clone the Flipboard repository.
  • Step 4a: View/Command Palette/Git: Clone
  • Step 4b: Enter the URL of the flipboard repository https://github.com/jamisonderek/flipboard.git then click Clone from URL and choose your /repos folder as the target. This will create a folder called flipboard in your repos folder.
  • Step 4c: When prompted if you would like to open the repository, choose Open.
  • Step 4d: When prompted if you trust the authors, choose Yes (or choose No if you prefer.)
• Step 5: Recursively clone the firmware repository. Be sure you choose Git: Clone (Recursive) from the Command Palette menu. This is different than the Git: Clone command you ran in the previous step!
  • Step 5a: View/Command Palette/Git: Clone (Recursive)
  • Step 5b: Enter the URL of the firmware you would like to run on your Flipper and choose your /repos folder as the target.
    • Official: https://github.com/flipperdevices/flipperzero-firmware.git
    • Momentum: https://github.com/Next-Flip/Momentum-Firmware.git
    • Unleashed: https://github.com/DarkFlippers/unleashed-firmware.git
    • RogueMaster: https://github.com/RogueMaster/flipperzero-firmware-wPlugins.git
    • Xtreme: https://github.com/Flipper-XFW/Xtreme-Firmware.git
  • NOTE: THIS IS RECURSIVELY CLONING THE REPOSITORY. This may take a few minutes to complete, depending on the speed of your internet connection.
  • Step 5c: When prompted if you would like to open the repository, choose Open.
  • Step 5d: When prompted if you trust the authors, choose Yes (so you will be able to build the code later.)
  • You may get a warning about "13 submodules". This is normal, you can safely ignore this warning.
• Step 6: Open GIT tools
  • Step 6a: Open the GIT CMD window (or any new command window should be fine.)
  • Step 6b: Type git and press enter.
  • Step 6c: If you get a message that says git is not recognized as an internal or external command, then you need to add the git tools to your path.
• Step 7: Install VSCode tools
  • Step 7a: Close VSCode and reopen it.
  • Step 7b: In VSCode, make sure the Explorer window is open (View/Explorer).
  • Step 7c: Right click on fbt and choose Open in Integrated Terminal. A new command terminal should appear at the bottom right of the screen.
  • Step 7d: Type ./fbt vscode_dist in the Integrated Terminal and press enter.
  • Step 7e: If prompted if you would like to install the recommended extensions, choose Install.
  • Step 7f: Close VSCode and reopen it.
  • Step 7g: If prompted if you would like to install the recommended extensions, choose Install.
  • Step 7h: Be sure the extensions CMAKE and CMAKE TOOLS are disabled for the workspace, otherwise Ctrl+Shift+B may not show the build options (and instead show things about cmake)!
    • Step 7h1: Click on the Extensions icon on the left side of the screen.
    • Step 7h2: Type cmake in the search box.
    • Step 7h3: Click on the CMAKE extension.
    • Step 7h4: If it has an Install button you are done.
    • Step 7h5: If it has a Disable button, click on the Disable button.
• Step 7: Build and deploy
  • Step 7a: Connect your Flipper to the computer.
  • Step 7b: Press Ctrl+Shift+B to bring up the build options.
  • Step 7c: Choose [Debug] Flash (USB, with resources).
  • Step 7d: The firmware and FAPs should get built.
  • Step 7e: The firmware should get installed on the Flipper Zero.
• Step 8: Copy the applications from the flipboard repository to the firmware repository's application_user folder.
  • Step 8a: Copy the folder flipblinky from /repos/flipboard/flipblinky to ./applications_user/flipblinky.
  • Step 8b: Copy the folder flipsignal from /repos/flipboard/flipsignal to ./applications_user/flipsignal.
  • Step 8c: Copy the folder flipkeyboard from /repos/flipboard/flipkeyboard to ./applications_user/flipkeyboard.
  • Step 8d: Copy the folder flipsimon from /repos/flipboard/simon-tutorial/completed/step-16/flipsimon to ./applications_user/flipsimon.

Build and deploy the application:

• Step 1: Connect your Flipper to the computer.
• Step 2: In VSCode, make sure the Explorer window is open (View/Explorer).
• Step 2: Open the file ./applications_user/flipblinky/app.c (or whichever application you want to build)
• Step 3: Press Ctrl+Shift+B to bring up the build options (or Terminal/Run Task...).
• Step 4: Choose [Debug] Launch App on Flipper.
• Step 5: The application should get built, the FAP installed on the Flipper Zero, and then the application should get launched.

If you prefer a different editor than VSCode, using FBT may be a good option. FBT is a command line tool that can build the firmware and applications. This is the same tool used by VSCode.

Prerequisites:

• Install Python
• Install GIT tools

Configure FBT:

• Step 1: Make sure you have installed the above prerequisites.
• Step 2: Create a folder called repos in your home directory. You can use any folder you want, but this tutorial assumes you are using /repos folder.
• Step 3: Clone the Flipboard repository.
  • Step 3a: Open a command prompt.
  • Step 3b: Change directory to your /repos folder (cd /repros).
  • Step 3c: Clone the flipboard repository git clone https://github.com/jamisonderek/flipboard.git
• Step 4: Clone the firmware repository recursively.
  • Step 4a: Open a command prompt.
  • Step 4b: Change directory to your /repos folder.
  • Step 4c: Clone the firmware repository you would like to run on your Flipper.
    • Official: git clone --recursive https://github.com/flipperdevices/flipperzero-firmware.git
    • Momentum: git clone --recursive https://github.com/Next-Flip/Momentum-Firmware.git
    • Unleashed: git clone --recursive https://github.com/DarkFlippers/unleashed-firmware.git
    • RogueMaster: git clone --recursive https://github.com/RogueMaster/flipperzero-firmware-wPlugins.git roguemaster-firmware
    • Xtreme: git clone --recursive https://github.com/Flipper-XFW/Xtreme-Firmware.git
• Step 5: Deploy the firmware
  • Step 5a: Connect your Flipper to the computer.
  • Step 5b: Open a command prompt.
  • Step 5c: Change directory to the firmware repository you cloned (e.g. cd Momentum-Firmware).
  • Step 5d: Run the command ./fbt FORCE=1 flash_usb_full
• Step 6: Copy the applications from the flipboard repository to the firmware repository's application_user folder.
  • Step 6a: Copy the folder flipblinky from /repos/flipboard/flipblinky to ./applications_user/flipblinky.
  • Step 6b: Copy the folder flipsignal from /repos/flipboard/flipsignal to ./applications_user/flipsignal.
  • Step 6c: Copy the folder flipkeyboard from /repos/flipboard/flipkeyboard to ./applications_user/flipkeyboard.

Build and deploy the application:

• Step 1: Connect your Flipper to the computer.
• Step 2: Open a command prompt.
• Step 3: Change directory to the firmware repository you cloned.
• Step 4: Run the command ./fbt launch APPSRC=./applications_user/flipblinky/app.c (or whichever application you want to build)

uFBT is a lightweight tool that can quickly build the application. This method does not work with Unleashed or Xtreme firmware. You must use FBT or VSCode for those firmwares.

Prerequisites:

• Install Python
• Install GIT tools

Prepare environment:

• Step 1: Make sure you have installed the above prerequisites.
• Step 2: Create a folder called repos in your home directory. You can use any folder you want, but this tutorial assumes you are using /repos folder.
• Step 3: Clone the Flipboard repository.
  • Step 3a: Open a command prompt.
  • Step 3b: Change directory to your /repos folder (cd /repros).
  • Step 3c: Clone the flipboard repository git clone https://github.com/jamisonderek/flipboard.git
• Step 4: Install ubft tool.
  • Linux & macOS: python3 -m pip install --upgrade ufbt
  • Windows: py -m pip install --upgrade ufbt
• Step 5: Set environment to match your firmware.
  • Step 5a: Connect your Flipper to the computer.
  • Step 5b: Open a command prompt.
  • Step 5c: Change directory to the flipboard application. (cd /repos/flipboard/flipblinky)
  • Step 5d: Run the command based on your firmware:
    • Official: ufbt update --index-url=https://update.flipperzero.one/firmware/directory.json
    • Unleashed: ufbt update --index-url=https://up.unleashedflip.com/directory.json
    • Momentum: ufbt update --index-url=https://up.momentum-fw.dev/firmware/directory.json
• Step 6: Build and deploy the application.
  • Step 6a: Connect your Flipper to the computer.
  • Step 6b: Open a command prompt.
  • Step 6c: Change directory to the flipboard application. (cd /repos/flipboard/flipblinky)
  • Step 6d: Run the command ufbt launch.

If you have need help, we are here for you. Also, we would love your feedback on cool ideas for future FlipBoard applications!

Please visit my Flipper Zero Discord server Flipper Zero Tutorials (Unofficial) and ask your questions in the #flipboard or #general channel.