File:Spur Gear 12mm, 18t.svg

From Wikimedia Commons, the free media repository
Jump to navigation Jump to search

Original file ‎(SVG file, nominally 400 × 350 pixels, file size: 28 KB)

Captions

Captions

Add a one-line explanation of what this file represents

Summary[edit]

Description A line drawing of a spur gear with an involute profile. This was drawn in Solid Edge and Inkscape using Unwin's Construction. The pitch diameter is 12mm and there are 18 teeth, giving a module of 2/3.
Date
Source

Self-made

W3CiThe source code of this SVG is valid.
Inkscape-yes 
This vector image was created with Inkscape .
Author Inductiveload
Permission
(Reusing this file)
Public domain I, the copyright holder of this work, release this work into the public domain. This applies worldwide.
In some countries this may not be legally possible; if so:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current22:28, 25 August 2007Thumbnail for version as of 22:28, 25 August 2007400 × 350 (28 KB)Inductiveload (talk | contribs){{Information |Description=A line drawing of a w:spur gear with an w:involute profile. This was drawn in Solid Edge and Inkscape using Unwin's Construction. The pitch diameter is 12mm and there are 18 teeth, giving a module of 2/3. |Source=S

You cannot overwrite this file.

The following 2 pages use this file:

File usage on other wikis

Retrieved from "https://commons.wikimedia.org/w/index.php?title=File:Spur_Gear_12mm,_18t.svg&oldid=722565168"