3D Printing - A beginners lessons learned
•Download as PPTX, PDF•
0 likes•132 views
3D printing requires patience and meticulous experimentation to understand the printer and printing parameters. As a beginner, don't expect results comparable to 2D printing and be prepared for proprietary software and manuals to provide little guidance. Key advice includes using premium filament, properly leveling the print bed, and cleaning the nozzle frequently to avoid frustration when first starting out with 3D printing.
Report
Share
Report
Share
Recommended
Presentasi malioboro--10-des-2010
Managing a software development team requires balancing technical and non-technical skills. The team leader should decide on tools, methodology, and conventions to provide guidance and prevent confusion. It is also important to clearly define the scope of problems to solve, maintain open communication, and allow the team to focus on technical work while handling administrative tasks.
Engineer - Mastering the Art of Software
With the evolution of software, starts an evolution of the software developer and how things are approached. A different and more responsible mindset is now required and with that comes the use of the Engineering Cycle that will provide not only the basic skill set but also the core base for a Software Engineer to handle any type of project.
Modern Agile for Agencies
This document outlines 5 key steps to establishing a smooth workflow using an agile approach: 1) Establish the workflow by mapping out major processes and stages, 2) Define policies for each stage, 3) Visualize work by adding cards for features and tasks, 4) Define work-in-progress limits for stages, and 5) Continuously improve by reviewing metrics and looking for areas of improvement. Following these steps helps minimize bottlenecks, focus work, and continuously refine the workflow.
Software Defect Prevention
Software Defect Prevention (SDP) is a strategy used in the software development lifecycle to identify the root causes of defects and prevent their recurrence. The purpose of SDP is to identify root causes, prevent the same defects from happening again, enhance productivity, and reduce rework efforts. Common methods of SDP include reviews/inspections, walkthroughs, defect logging/documentation, root cause analysis, story kick-offs, and story desk-checks. These methods help verify requirements are met before development begins and catch issues before deployment.
Developer vs Tester
The document discusses the roles of software developers and quality assurance (QA) testers. It notes that developers are problem solvers who turn ideas into realities by developing engaging consumer experiences, requiring technical skills as well as the ability to teach oneself and solve problems. QA testers protect the gateway to released software and are analytical with strong communication skills to report bugs and convince others. They explore systems to understand them and find bugs to deliver quality products, helping stakeholders sleep better.
Cardign Post-Mortem
The document discusses the importance of launching a product early even if version 1 is not perfect, and reducing problems iteratively through collaboration and experimentation with developers to validate ideas. It emphasizes tackling issues step-by-step to minimize friction rather than waiting until all problems are solved before launching.
Scrum Anti Patterns
Anti-patterns are a commonly used process, structure, or pattern of action that despite initially appearing to be an appropriate and effective response to a problem, has more bad consequences than good ones. Another solution exists that is documented, repeatable, and proven to be effective.(Wikipedia)
The most of the issues we are facing in every Scrum implementation are common and well known, There are anti-patterns that lead to this issues and there are effective known patterns to overcome these issues.
We are going to talk about the common issues, its causes and how to avoid it like long and ineffective meetings, Unorganized backlog, Amount of details in stories, messy code base, huge technical debt, estimation, Unfinished work at end of sprint ...etc.
Spee Project
ITT Tech hosted two events for Girl Scout troops on computer skills. At the first event on 4/25, volunteers from ITT Tech helped Brownie troops with minor printer issues. Pictures were also taken. The second event on 5/2 involved website design, where volunteers received a brief lecture before assisting with issues like passwords, despite initial uncertainty about the topic.
Recommended
Presentasi malioboro--10-des-2010
Managing a software development team requires balancing technical and non-technical skills. The team leader should decide on tools, methodology, and conventions to provide guidance and prevent confusion. It is also important to clearly define the scope of problems to solve, maintain open communication, and allow the team to focus on technical work while handling administrative tasks.
Engineer - Mastering the Art of Software
With the evolution of software, starts an evolution of the software developer and how things are approached. A different and more responsible mindset is now required and with that comes the use of the Engineering Cycle that will provide not only the basic skill set but also the core base for a Software Engineer to handle any type of project.
Modern Agile for Agencies
This document outlines 5 key steps to establishing a smooth workflow using an agile approach: 1) Establish the workflow by mapping out major processes and stages, 2) Define policies for each stage, 3) Visualize work by adding cards for features and tasks, 4) Define work-in-progress limits for stages, and 5) Continuously improve by reviewing metrics and looking for areas of improvement. Following these steps helps minimize bottlenecks, focus work, and continuously refine the workflow.
Software Defect Prevention
Software Defect Prevention (SDP) is a strategy used in the software development lifecycle to identify the root causes of defects and prevent their recurrence. The purpose of SDP is to identify root causes, prevent the same defects from happening again, enhance productivity, and reduce rework efforts. Common methods of SDP include reviews/inspections, walkthroughs, defect logging/documentation, root cause analysis, story kick-offs, and story desk-checks. These methods help verify requirements are met before development begins and catch issues before deployment.
Developer vs Tester
The document discusses the roles of software developers and quality assurance (QA) testers. It notes that developers are problem solvers who turn ideas into realities by developing engaging consumer experiences, requiring technical skills as well as the ability to teach oneself and solve problems. QA testers protect the gateway to released software and are analytical with strong communication skills to report bugs and convince others. They explore systems to understand them and find bugs to deliver quality products, helping stakeholders sleep better.
Cardign Post-Mortem
The document discusses the importance of launching a product early even if version 1 is not perfect, and reducing problems iteratively through collaboration and experimentation with developers to validate ideas. It emphasizes tackling issues step-by-step to minimize friction rather than waiting until all problems are solved before launching.
Scrum Anti Patterns
Anti-patterns are a commonly used process, structure, or pattern of action that despite initially appearing to be an appropriate and effective response to a problem, has more bad consequences than good ones. Another solution exists that is documented, repeatable, and proven to be effective.(Wikipedia)
The most of the issues we are facing in every Scrum implementation are common and well known, There are anti-patterns that lead to this issues and there are effective known patterns to overcome these issues.
We are going to talk about the common issues, its causes and how to avoid it like long and ineffective meetings, Unorganized backlog, Amount of details in stories, messy code base, huge technical debt, estimation, Unfinished work at end of sprint ...etc.
Spee Project
ITT Tech hosted two events for Girl Scout troops on computer skills. At the first event on 4/25, volunteers from ITT Tech helped Brownie troops with minor printer issues. Pictures were also taken. The second event on 5/2 involved website design, where volunteers received a brief lecture before assisting with issues like passwords, despite initial uncertainty about the topic.
Pragmatic guide to AB testing - Agile and Automation days 2019
1. The document discusses testing solutions to improve a software product by defining success criteria, building a list of solutions, setting up tests, and gathering/interpreting results.
2. It emphasizes defining measurable success criteria, avoiding subjective terms. Multiple criteria from different angles are recommended.
3. Tests should target relevant user groups to avoid results pollution and confirm the proposed solution provides value before significant investment.
Design Yourself: Communication and Process in UXD
This document discusses best practices for communication throughout the user experience design (UXD) process. It emphasizes treating all stakeholders, including customers, users, and developers, with respect and understanding their various needs and perspectives. Effective communication involves exploring user needs, co-creating solutions, discussing ideas early and often, and reviewing work at all stages of development.
Lean canvas validation_board_21_nov
This document summarizes the Thailand Practical Software Engineering Conference #1, which was held on November 21, 2013 at Software Park. It discusses why business plans are often not useful for startups and advocates using a Lean Canvas approach instead. The Lean Canvas approach involves sketching out customer segments, features, and hypotheses to test with minimum viable products. It also discusses prioritizing risks and defining experiments to learn from customer feedback in order to iteratively improve the product.
Scrum - An introduction
The document provides an overview of Scrum and its key elements. It discusses that Scrum is an iterative, collaborative framework for managing product development. It also summarizes that Scrum uses sprints, daily stand-up meetings, product backlogs and user stories to help development teams work in an agile way. The document outlines the core Scrum roles of Product Owner, Scrum Master and Development Team and how they work together.
Design sprint
A design sprint is a 5-phase framework that helps teams answer critical business questions through rapid prototyping and user testing. The phases are: Map (understand the problem), Sketch (generate ideas), Decide (select the best concept), Prototype (build something testable), and Test (get user feedback). This process helps spark innovation, encourage user-centered design, align teams, and launch products faster. A key benefit is that it provides validated direction and user input to inform product development. Design sprints are best for when a team needs clarity on a new opportunity or is stuck on an issue.
Go for a life changing experience
These are crisp and informative both. You can use alerts like the Conference alerts engineering so as to stay informed about the every conference that is going to take place in near future.
3 d printing(lesson 1)
Hello guys..
Welcome to world of 3D printing! Its next generation technology!
Heres my first lesson on 3D printing . Stay tuned for more Lessons.
Introduction to 3D Printing
From a presentation given at the Jupiter Branch of the Palm Beach County Library System on Wed, Jun 25, 6:30 pm:
Robotics Engineer, Pierre Baillargeon, will discuss 3D printing. Learn about this new innovative technology, how it works, what it looks like and what are some of the things you can create using a 3D printer. (60 min.)
Top 10 Dirty Secrets in Direct to Garment Printing
The document discusses 10 "dirty secrets" of direct to garment printing. It warns that print samples provided by manufacturers represent the best possible quality and that custom prints using the buyer's own graphics are needed to properly evaluate quality. It also emphasizes that buyers must be prepared to do maintenance and learn the software, as technical support from the manufacturer will have limits. While speedy printers require more maintenance, proper training and realistic expectations are needed to successfully use direct to garment printing equipment.
IT software development
GetAProgrammer is an Australia based IT software company which provides software development services,seo and web design services,php programming, mobile app development, wordpress development and more. You should hire our company for better result.
Printer home
The best part is that customers with easy online printer support to sit comfortably at home while doing printer repairs. The content of the article includes important things to remember for basic necessities to buy a right printer, provides solutions for easy printing when the printer refuses to work and more such printing related valuables for readers. This writing is essential if you want to develop your knowledge of the basics of printing technology.
Introduction to 3D Modelling
Here's the slideshow for my first course at Fablab Milan March 27th, about "Introduction to 3D modelling".
Getting your hands dirty - How tech authors may be able to survive in the mac...
This presentation was held at the STC Summit 2005 in Seattle. It shows how technical authors, hit by the offshoring of tech comms, can find plenty of work in the machinery business. After all, that business domain is less likely to be offshored and there are many more small machinery companies than global software corporations.
Webinar | Good Guys vs. Bad Data: How to Be a Data Quality Hero
Duplicate contact and account records. Missing field values. Inaccurate or outdated information. Unstandardized data. Typos upon typos. If you manage and operate sales and marketing tools, you’ve likely encountered these bad data scenarios (and others!).
We get it — data quality isn’t the sexiest topic. But the impact of poor data quality is undeniable, causing 21% of marketing budgets to be wasted, according to research from Forrester and Marketing Evolution. Furthermore, factors like increasing competition and evolving buyer needs continue to make data health even more important. Improving data quality can stretch your marketing dollars further, enable operational efficiency, and act as a strategic growth lever.
Tim Liu (Head of Product at Hull) and Brad Smith (Co-founder & CEO at Sonar) have spent their entire careers working in data integration and operations, so they’ve seen it all. In this webinar, they’ll share:
- Data quality nightmares they’ve personally dealt with
- Common scenarios where bad data can rear its ugly head
- Proactive strategies for getting ahead
Unit 4 - Reprographics
The document discusses reprographics, which is the process of copying documents. It provides an overview of common reprographics equipment like photocopiers, printers, scanners, binders, and laminators. It emphasizes the importance of training staff on proper and safe equipment use. Outsourcing reprographics work to an external agency is also discussed, along with factors to consider like material type, quality, volume, and turnaround needs.
Unit 4
The document discusses reprographics, which is the process of copying documents. It provides an overview of common reprographics equipment like photocopiers, printers, scanners, binders, and laminators. It emphasizes the importance of training staff on proper and safe equipment use. Outsourcing reprographics work to an external agency is also discussed, along with factors to consider like material type, quality, volume, and turnaround needs.
Getting it Built
A primer to agile development, lean methodology, and building software with or without a technical team.
Web design rules for PR
The document provides 45 rules of web development for PR professionals to help them effectively manage digital projects and avoid annoying developers, alienating designers, and looking stupid in front of clients. Some key tips include starting with the user experience, planning for contingencies as timelines often slip, properly briefing teams and clients, and continuously learning about the technical aspects of web development.
What is Importance of Storyboarding
Storyboarding plays an important role whenever we plan to build a vision and here's how important it can be for you and your brand.
What is engineering
This document discusses the importance and uses of technical drawings. It explains that drawings are used to represent manufactured items and are a universal language for conveying design information. The document outlines different types of drawings, including multiview, pictorial, and section drawings. It also compares manual and computer-aided drafting, noting advantages like speed and accuracy with CAD. Key applications of drawings in fields like construction, manufacturing, and engineering are also highlighted. Finally, it emphasizes that drawings must be detailed, annotated, and drawn clearly to effectively communicate design specifications.
CAD Manager's Guide to Implementing a 3D CAD System
This 3D guide is designed for people who need to implement 3D CAD throughout their company. You may be a CAD
manager, a designer, or an engineer who believes that your company can benefit from 3D—or you may be an IT person
who has just received a mandate to evaluate 3D software. Whatever your title may be, part of your job is to get your
company up and running on 3D CAD software.
Getting Started as a PM
1. The document provides guidance for product managers on how to effectively do their job.
2. It emphasizes that product managers should present the right problems to developers, choose the most impactful work, and inspire and enable their developers.
3. Additionally, it stresses the importance of understanding customers, tracking key metrics like bugs and reliability, gaining advocates across the organization, and demonstrating passion when presenting.
More Related Content
What's hot
Pragmatic guide to AB testing - Agile and Automation days 2019
1. The document discusses testing solutions to improve a software product by defining success criteria, building a list of solutions, setting up tests, and gathering/interpreting results.
2. It emphasizes defining measurable success criteria, avoiding subjective terms. Multiple criteria from different angles are recommended.
3. Tests should target relevant user groups to avoid results pollution and confirm the proposed solution provides value before significant investment.
Design Yourself: Communication and Process in UXD
This document discusses best practices for communication throughout the user experience design (UXD) process. It emphasizes treating all stakeholders, including customers, users, and developers, with respect and understanding their various needs and perspectives. Effective communication involves exploring user needs, co-creating solutions, discussing ideas early and often, and reviewing work at all stages of development.
Lean canvas validation_board_21_nov
This document summarizes the Thailand Practical Software Engineering Conference #1, which was held on November 21, 2013 at Software Park. It discusses why business plans are often not useful for startups and advocates using a Lean Canvas approach instead. The Lean Canvas approach involves sketching out customer segments, features, and hypotheses to test with minimum viable products. It also discusses prioritizing risks and defining experiments to learn from customer feedback in order to iteratively improve the product.
Scrum - An introduction
The document provides an overview of Scrum and its key elements. It discusses that Scrum is an iterative, collaborative framework for managing product development. It also summarizes that Scrum uses sprints, daily stand-up meetings, product backlogs and user stories to help development teams work in an agile way. The document outlines the core Scrum roles of Product Owner, Scrum Master and Development Team and how they work together.
Design sprint
A design sprint is a 5-phase framework that helps teams answer critical business questions through rapid prototyping and user testing. The phases are: Map (understand the problem), Sketch (generate ideas), Decide (select the best concept), Prototype (build something testable), and Test (get user feedback). This process helps spark innovation, encourage user-centered design, align teams, and launch products faster. A key benefit is that it provides validated direction and user input to inform product development. Design sprints are best for when a team needs clarity on a new opportunity or is stuck on an issue.
Go for a life changing experience
These are crisp and informative both. You can use alerts like the Conference alerts engineering so as to stay informed about the every conference that is going to take place in near future.
What's hot (6)
Pragmatic guide to AB testing - Agile and Automation days 2019
Pragmatic guide to AB testing - Agile and Automation days 2019
Similar to 3D Printing - A beginners lessons learned
3 d printing(lesson 1)
Hello guys..
Welcome to world of 3D printing! Its next generation technology!
Heres my first lesson on 3D printing . Stay tuned for more Lessons.
Introduction to 3D Printing
From a presentation given at the Jupiter Branch of the Palm Beach County Library System on Wed, Jun 25, 6:30 pm:
Robotics Engineer, Pierre Baillargeon, will discuss 3D printing. Learn about this new innovative technology, how it works, what it looks like and what are some of the things you can create using a 3D printer. (60 min.)
Top 10 Dirty Secrets in Direct to Garment Printing
The document discusses 10 "dirty secrets" of direct to garment printing. It warns that print samples provided by manufacturers represent the best possible quality and that custom prints using the buyer's own graphics are needed to properly evaluate quality. It also emphasizes that buyers must be prepared to do maintenance and learn the software, as technical support from the manufacturer will have limits. While speedy printers require more maintenance, proper training and realistic expectations are needed to successfully use direct to garment printing equipment.
IT software development
GetAProgrammer is an Australia based IT software company which provides software development services,seo and web design services,php programming, mobile app development, wordpress development and more. You should hire our company for better result.
Printer home
The best part is that customers with easy online printer support to sit comfortably at home while doing printer repairs. The content of the article includes important things to remember for basic necessities to buy a right printer, provides solutions for easy printing when the printer refuses to work and more such printing related valuables for readers. This writing is essential if you want to develop your knowledge of the basics of printing technology.
Introduction to 3D Modelling
Here's the slideshow for my first course at Fablab Milan March 27th, about "Introduction to 3D modelling".
Getting your hands dirty - How tech authors may be able to survive in the mac...
This presentation was held at the STC Summit 2005 in Seattle. It shows how technical authors, hit by the offshoring of tech comms, can find plenty of work in the machinery business. After all, that business domain is less likely to be offshored and there are many more small machinery companies than global software corporations.
Webinar | Good Guys vs. Bad Data: How to Be a Data Quality Hero
Duplicate contact and account records. Missing field values. Inaccurate or outdated information. Unstandardized data. Typos upon typos. If you manage and operate sales and marketing tools, you’ve likely encountered these bad data scenarios (and others!).
We get it — data quality isn’t the sexiest topic. But the impact of poor data quality is undeniable, causing 21% of marketing budgets to be wasted, according to research from Forrester and Marketing Evolution. Furthermore, factors like increasing competition and evolving buyer needs continue to make data health even more important. Improving data quality can stretch your marketing dollars further, enable operational efficiency, and act as a strategic growth lever.
Tim Liu (Head of Product at Hull) and Brad Smith (Co-founder & CEO at Sonar) have spent their entire careers working in data integration and operations, so they’ve seen it all. In this webinar, they’ll share:
- Data quality nightmares they’ve personally dealt with
- Common scenarios where bad data can rear its ugly head
- Proactive strategies for getting ahead
Unit 4 - Reprographics
The document discusses reprographics, which is the process of copying documents. It provides an overview of common reprographics equipment like photocopiers, printers, scanners, binders, and laminators. It emphasizes the importance of training staff on proper and safe equipment use. Outsourcing reprographics work to an external agency is also discussed, along with factors to consider like material type, quality, volume, and turnaround needs.
Unit 4
The document discusses reprographics, which is the process of copying documents. It provides an overview of common reprographics equipment like photocopiers, printers, scanners, binders, and laminators. It emphasizes the importance of training staff on proper and safe equipment use. Outsourcing reprographics work to an external agency is also discussed, along with factors to consider like material type, quality, volume, and turnaround needs.
Getting it Built
A primer to agile development, lean methodology, and building software with or without a technical team.
Web design rules for PR
The document provides 45 rules of web development for PR professionals to help them effectively manage digital projects and avoid annoying developers, alienating designers, and looking stupid in front of clients. Some key tips include starting with the user experience, planning for contingencies as timelines often slip, properly briefing teams and clients, and continuously learning about the technical aspects of web development.
What is Importance of Storyboarding
Storyboarding plays an important role whenever we plan to build a vision and here's how important it can be for you and your brand.
What is engineering
This document discusses the importance and uses of technical drawings. It explains that drawings are used to represent manufactured items and are a universal language for conveying design information. The document outlines different types of drawings, including multiview, pictorial, and section drawings. It also compares manual and computer-aided drafting, noting advantages like speed and accuracy with CAD. Key applications of drawings in fields like construction, manufacturing, and engineering are also highlighted. Finally, it emphasizes that drawings must be detailed, annotated, and drawn clearly to effectively communicate design specifications.
CAD Manager's Guide to Implementing a 3D CAD System
This 3D guide is designed for people who need to implement 3D CAD throughout their company. You may be a CAD
manager, a designer, or an engineer who believes that your company can benefit from 3D—or you may be an IT person
who has just received a mandate to evaluate 3D software. Whatever your title may be, part of your job is to get your
company up and running on 3D CAD software.
Getting Started as a PM
1. The document provides guidance for product managers on how to effectively do their job.
2. It emphasizes that product managers should present the right problems to developers, choose the most impactful work, and inspire and enable their developers.
3. Additionally, it stresses the importance of understanding customers, tracking key metrics like bugs and reliability, gaining advocates across the organization, and demonstrating passion when presenting.
3D PRINTING 101 A BEGINNER'S GUIDE TO 3D PRINTING
3D printing is a modern manufacturing process that creates
physical objects from digital designs. It doesn’t require
much human intervention and the printing materials are
easy to handle. However, there are still a lot of
misconceptions about 3D printing.
Stay up to date: https://geni.us/kit-3d-printers
What’s New With 3D Design and Printing?
3D printing has been a focal point in library makerspaces for several years; however, it seems that interest in the technology has decelerated. The technology may have slowed down, but there is still a lot going on in this space, which can be overwhelming to keep up with it all. In this webinar:
- Learn what 3D printing is, how it works, and gain insight on how to implement/maintain, and to perhaps build your own 3D printer.
- Get a snapshot of some of the best 3D printers and products on the market, including an overview on resin and carbon printers.
- Discover a variety of 3D design applications to help with getting ideas to working prototypes.
- Study trends in digital scanning and other emerging 3D design/printing technologies.
- Interview an expert 3D designer/printer in the industry to get even more insight into this exciting technology.
Session On Mockups
This document provides guidance on prototyping software projects. It recommends starting with paper and pencil to list target users, features and create wireframes before developing mockups and flows. Basic sketches, flow charts, wireframes and mockups are explained. The document provides examples of a photo sharing app prototype created with various tools. It stresses the importance of getting feedback in an iterative design process and provides some case studies and resources for prototyping.
Legal Tech Roundup: Tools and Services Your Firm Needs in 2023
This document provides a summary of a webinar on legal tech tools and services for 2023. It includes introductions and information about CLE/CPD credit for attending the live webinar. The agenda covers Microsoft Word tips, Outlook tips, Adobe Acrobat tips, and rapid fire tech tools. Additional resources from Clio are also mentioned, including Clio Manage, Clio Grow, and Lawyaw.
Similar to 3D Printing - A beginners lessons learned (20)
Top 10 Dirty Secrets in Direct to Garment Printing
Top 10 Dirty Secrets in Direct to Garment Printing
Getting your hands dirty - How tech authors may be able to survive in the mac...
Getting your hands dirty - How tech authors may be able to survive in the mac...
Webinar | Good Guys vs. Bad Data: How to Be a Data Quality Hero
Webinar | Good Guys vs. Bad Data: How to Be a Data Quality Hero
CAD Manager's Guide to Implementing a 3D CAD System
CAD Manager's Guide to Implementing a 3D CAD System
Legal Tech Roundup: Tools and Services Your Firm Needs in 2023
Legal Tech Roundup: Tools and Services Your Firm Needs in 2023
Recently uploaded
Chapter 3 - Static Testing (Review) V4.0
Chapter 3 of ISTQB Foundation 2018 syllabus with sample questions. Answers about what is static testing, what is review, types of review, informal review, walkthrough, technical review, inspection.
Call Girls Chennai ☎️ +91-7426014248 😍 Chennai Call Girl Beauty Girls Chennai...
Call Girls Chennai ☎️ +91-7426014248 😍 Chennai Call Girl Beauty Girls Chennai Escorts
Move Auth, Policy, and Resilience to the Platform
Developer's time is the most crucial resource in an enterprise IT organization. Too much time is spent on undifferentiated heavy lifting and in the world of APIs and microservices much of that is spent on non-functional, cross-cutting networking requirements like security, observability, and resilience.
As organizations reconcile their DevOps practices into Platform Engineering, tools like Istio help alleviate developer pain. In this talk we dig into what that pain looks like, how much it costs, and how Istio has solved these concerns by examining three real-life use cases. As this space continues to emerge, and innovation has not slowed, we will also discuss the recently announced Istio sidecar-less mode which significantly reduces the hurdles to adopt Istio within Kubernetes or outside Kubernetes.
Guidelines for Effective Data Visualization
This PPT discuss about importance and need of data visualization, and its scope. Also sharing strong tips related to data visualization that helps to communicate the visual information effectively.
Dev Dives: Mining your data with AI-powered Continuous Discovery
Want to learn how AI and Continuous Discovery can uncover impactful automation opportunities? Watch this webinar to find out more about UiPath Discovery products!
Watch this session and:
👉 See the power of UiPath Discovery products, including Process Mining, Task Mining, Communications Mining, and Automation Hub
👉 Watch the demo of how to leverage system data, desktop data, or unstructured communications data to gain deeper understanding of existing processes
👉 Learn how you can benefit from each of the discovery products as an Automation Developer
🗣 Speakers:
Jyoti Raghav, Principal Technical Enablement Engineer @UiPath
Anja le Clercq, Principal Technical Enablement Engineer @UiPath
⏩ Register for our upcoming Dev Dives July session: Boosting Tester Productivity with Coded Automation and Autopilot™
👉 Link: https://bit.ly/Dev_Dives_July
This session was streamed live on June 27, 2024.
Check out all our upcoming Dev Dives 2024 sessions at:
🚩 https://bit.ly/Dev_Dives_2024
TrustArc Webinar - Your Guide for Smooth Cross-Border Data Transfers and Glob...
Global data transfers can be tricky due to different regulations and individual protections in each country. Sharing data with vendors has become such a normal part of business operations that some may not even realize they’re conducting a cross-border data transfer!
The Global CBPR Forum launched the new Global Cross-Border Privacy Rules framework in May 2024 to ensure that privacy compliance and regulatory differences across participating jurisdictions do not block a business's ability to deliver its products and services worldwide.
To benefit consumers and businesses, Global CBPRs promote trust and accountability while moving toward a future where consumer privacy is honored and data can be transferred responsibly across borders.
This webinar will review:
- What is a data transfer and its related risks
- How to manage and mitigate your data transfer risks
- How do different data transfer mechanisms like the EU-US DPF and Global CBPR benefit your business globally
- Globally what are the cross-border data transfer regulations and guidelines
Day 4 - Excel Automation and Data Manipulation
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program: https://bit.ly/Africa_Automation_Student_Developers
In this fourth session, we shall learn how to automate Excel-related tasks and manipulate data using UiPath Studio.
📕 Detailed agenda:
About Excel Automation and Excel Activities
About Data Manipulation and Data Conversion
About Strings and String Manipulation
💻 Extra training through UiPath Academy:
Excel Automation with the Modern Experience in Studio
Data Manipulation with Strings in Studio
👉 Register here for our upcoming Session 5/ June 25: Making Your RPA Journey Continuous and Beneficial: https://community.uipath.com/events/details/uipath-lagos-presents-session-5-making-your-automation-journey-continuous-and-beneficial/
Database Management Myths for Developers
Myths, Mistakes, and Lessons learned about Managing SQL Server databases. We also focus on automating and validating your critical database management tasks.
Leading a Tableau User Group - Onboarding deck for new leaders
Onboarding deck for new Tableau User Group Leaders.
intra-mart Accel series 2024 Spring updates_En
NTT Data Intra-Mart Corporation released its 2024 Spring update information for its intra-mart Accel Platform and Accel Series products.
Metadata Lakes for Next-Gen AI/ML - Datastrato
As data catalogs evolve to meet the growing and new demands of high-velocity, unstructured data, we see them taking a new shape as an emergent and flexible way to activate metadata for multiple uses. This talk discusses modern uses of metadata at the infrastructure level for AI-enablement in RAG pipelines in response to the new demands of the ecosystem. We will also discuss Apache (incubating) Gravitino and its open source-first approach to data cataloging across multi-cloud and geo-distributed architectures.
Chapter 2 - Testing Throughout SDLC V4.0
The document discusses testing throughout the software development life cycle. It describes different software development models including sequential, incremental, and iterative models. It also covers different test levels from component and integration testing to system and acceptance testing. The document discusses different types of testing including functional and non-functional testing. It also covers topics like maintenance testing and triggers for additional testing when changes are made. Also covers concepts of Agile including DevOps, Shift Left Approach, TDD, BDD, ATDD, Retrospective and Process Improvement
Cyber Recovery Wargame
For senior executives, successfully managing a major cyber attack relies on your ability to minimise operational downtime, revenue loss and reputational damage.
Indeed, the approach you take to recovery is the ultimate test for your Resilience, Business Continuity, Cyber Security and IT teams.
Our Cyber Recovery Wargame prepares your organisation to deliver an exceptional crisis response.
Event date: 19th June 2024, Tate Modern
Multivendor cloud production with VSF TR-11 - there and back again
Multivendor cloud production with VSF
TR-11 - there and back again
this resume for sadika shaikh bca student
I am a dedicated BCA student with a strong foundation in web technologies, including PHP and MySQL. I have hands-on experience in Java and Python, and a solid understanding of data structures. My technical skills are complemented by my ability to learn quickly and adapt to new challenges in the ever-evolving field of computer science.
STKI Israeli Market Study 2024 final v1
2024 Market analysis of the Israeli Information Technology Market
Balancing Compaction Principles and Practices
Compaction is a crucial component for preventing storage consumption from exploding. In this session, we’ll talk about why compaction is required and its principles of operation, the main compaction strategies available for use, when they should be used, and how they can be configured. Finally, we’ll present new compaction features recently introduced in ScyllaDB Enterprise and ScyllaDB Cloud.
What is an RPA CoE? Session 4 – CoE Scaling
How to scale a COE to meet organizational missions.
Topics covered:
• What is the original focal area?
• How to expand the COE globally.
• Is a centralized or decentralized model better for scaling?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
The "Zen" of Python Exemplars - OTel Community Day
The Zen of Python states "There should be one-- and preferably only one --obvious way to do it." OpenTelemetry is the obvious choice for traces but bad news for Pythonistas when it comes to metrics because both Prometheus and OpenTelemetry offer compelling choices. Let's look at all of the ways you can tie metrics and traces together with exemplars whether you're working with OTel metrics, Prom metrics, Prom-turned-OTel metrics, or OTel-turned-Prom metrics!
Call Girls Firozabad ☎️ +91-7426014248 😍 Firozabad Call Girl Beauty Girls Fir...
Call Girls Firozabad ☎️ +91-7426014248 😍 Firozabad Call Girl Beauty Girls Firozabad Escort
Recently uploaded (20)
Call Girls Chennai ☎️ +91-7426014248 😍 Chennai Call Girl Beauty Girls Chennai...
Call Girls Chennai ☎️ +91-7426014248 😍 Chennai Call Girl Beauty Girls Chennai...
Dev Dives: Mining your data with AI-powered Continuous Discovery
Dev Dives: Mining your data with AI-powered Continuous Discovery
TrustArc Webinar - Your Guide for Smooth Cross-Border Data Transfers and Glob...
TrustArc Webinar - Your Guide for Smooth Cross-Border Data Transfers and Glob...
Leading a Tableau User Group - Onboarding deck for new leaders
Leading a Tableau User Group - Onboarding deck for new leaders
Multivendor cloud production with VSF TR-11 - there and back again
Multivendor cloud production with VSF TR-11 - there and back again
The "Zen" of Python Exemplars - OTel Community Day
The "Zen" of Python Exemplars - OTel Community Day
Call Girls Firozabad ☎️ +91-7426014248 😍 Firozabad Call Girl Beauty Girls Fir...
Call Girls Firozabad ☎️ +91-7426014248 😍 Firozabad Call Girl Beauty Girls Fir...
3D Printing - A beginners lessons learned
- 1. 3D Printing A beginners lessons learned
- 2. Key success factors 1. You need to have a goal you want/need to achieve (a thing you want to create/print). 2. You will need a lot of time, patience and meticulousness for experiments to fully understand your printer (and the physics behind) as well as all print parameters.
- 3. Important beginner hints • Don’t expect 3D printing somehow comparable with 2D print • Don’t expect budget printers to ship with any good manual or advices. Name yourself lucky, if you know someone who can give expert advice. • Don’t expect any 3D-CAD software being easy or like “Photoshop”. Start with tinkercad.com! • Make sure you use a premium filament from a vendor/dealer who can give advise. • Make sure, your printer can pull the filament physically in with no problem (sound easy, but its not) • Level your print bed and clean the nozzle more often then recommended. • Make sure, your Printer is “open enough, that “Simplify 3D” can control it. Software shipped with budget printers is proprietary crap. • Make sure, you use PLA and BuildTak as a beginner to avoid frustration from warping.
- 4. Recommendations (Germany) • 3D-Printer • Filament • Software • Print Bed